Male adapters with tapered threads (NPT) are generally used for joining to female threads of rigid steel, Myers type hubs or terminating into precast iron boxes with female thread entrances.
| Items |
40C-SW-33 4 Inch (in) Nominal Size Iron Pipe Size (IPS) Standard Wall Aboveground Male Adapter |
20B-SW-33 2 Inch (in) Nominal Size ID Standard Wall Belowground (Tubular) Male Adapter |
40B-SW-33 4 Inch (in) Nominal Size ID Belowground (Tubular) Male Adapter |
|||
| Description | Male adapters with tapered threads (NPT) are generally used for joining to female threads of rigid steel, Myers type hubs or terminating into precast iron boxes with female thread entrances. | |||||
| Brands | Champion Fiberglass®, Inc. | |||||
| Type | Iron Pipe Size (IPS) Standard Wall Aboveground Male Adapter | ID Belowground (Tubular) Male Adapter | ID Belowground (Tubular) Male Adapter | |||
| Nominal Size | 4 in | 2 in | 4 in | |||
| Wall Thickness | Standard Wall | |||||
| D | 4.47 in114 mm | 2.16 in55 mm | 4.16 in106 mm | |||
| L | 5 in127 mm | |||||
| Connection Type | Male, Tapered Threads (National Pipe Thread (NPT)) | |||||
| Conduit Type | Adapter | |||||
| Color | Black | |||||
| Weight | 0.42 kg0.93 lb | 0.20 kg0.44 lb | 0.46 kg1.02 lb | |||
| Industry Standards/Certifications | Underwriters Laboratories (UL) | |||||
| Application | Threaded Fittings | |||||
| Features | Most Commonly used. | |||||
| General Information |
Fiberglass Conduit Specifications for Use Below Ground The conduit shall be fiberglass conduit, also known as Reinforced Thermosetting Resin Conduit (RTRC), manufactured using the single circuit filament winding process. Multi circuit windings are not allowed. The conduit shall have a winding angle as close as possible to 54.75 degrees. The resin system shall be epoxy based, with no fillers, using an anhydride curing agent. The fiberglass shall consist of continuous E-glass roving. The conduit shall not contain any halogen compounds containing chlorine, bromine, fluorine and iodine in more than trace amounts when burning. Conduit and elbows shall be manufactured from the same resin/hardener/glass systems manufactured by the same filament wound system. Fiberglass conduit fittings and accessories shall be manufactured using one of two manufacturing procedures. The first method shall use the same process, methods, and components as used to manufacture the fiberglass conduit. The second method shall use the compression molding process, Sheet Molding Compound (SMC), for the manufacture of the finished component. The SMC material shall be a vinyl ester resin with +30% reinforcement of glass. The glass fibers should be approximately 1" in length. The SMC material shall be fire resistant to UL 2515. Conduit shall be integral bell and spigot or bonded coupling and spigot. Conduit, elbows and fittings are specified for use throughout a temperature range of -60ºF (-51ºC) to 250ºF (121ºC). Manufacturer shall have a current Certificate of Compliance, issued by an independent and accredited company, with an ISO 9001:2008 Quality Management System. |
Fiberglass Conduit Specifications for Use Below Ground The conduit shall be fiberglass conduit, also known as Reinforced Thermosetting Resin Conduit (RTRC), manufactured using the single circuit filament winding process. Multi circuit windings are not allowed. The conduit shall have a winding angle as close as possible to 54.75 degrees. The resin system shall be epoxy based, with no fillers, using an anhydride curing agent. The fiberglass shall consist of continuous E-glass roving. The conduit shall not contain any halogen compounds containing chlorine, bromine, fluorine and iodine in more than trace amounts when burning. Conduit and elbows shall be manufactured from the same resin/hardener/glass systems manufactured by the same filament wound system. Fiberglass conduit fittings and accessories shall be manufactured using one of two manufacturing procedures. The first method shall use the same process, methods, and components as used to manufacture the fiberglass conduit. The second method shall use the compression molding process, Sheet Molding Compound (SMC), for the manufacture of the finished component. The SMC material shall be a vinyl ester resin with +30% reinforcement of glass. The glass fibers should be approximately 1" in length. The SMC material shall be fire resistant to UL 2515. Conduit shall be integral bell and spigot or bonded coupling and spigot. Conduit, elbows and fittings are specified for use throughout a temperature range of -60ºF (-51ºC) to 250ºF (121ºC). Manufacturer shall have a current Certificate of Compliance, issued by an independent and accredited company, with an ISO 9001:2008 Quality Management System. |
||||
|
|
||||||
