COMPANY HEADER
Print Back
Alignment/Expansion fitting is sometimes referred to as an Expansion/Deflection joint.
(The clamps holding the rubber sleeve connecting the two nipples are made from stainless steel for corrosion protection.)
Unit of Measure

Specifications

Brands

 N/A Champion Fiberglass®, Inc.

Type

 N/A Iron Pipe Size (IPS) Belowground Alignment/Expansion Fitting with O-Ring

Style

 N/A Alignment/Expansion

Wall Thickness

 N/A Medium Wall

Color

 N/A Black

Weight

 N/A 3.81 kg8.40 lb

Industry Standards/Certifications

 N/A Underwriters Laboratories (UL)

Dimesional Attributes

Nominal Size

 N/A 5 in

A

 N/A 5.79 in147 mm

B

 N/A 5.6 in142 mm

L [Min]

 N/A 37 in940 mm

L [Max]

 N/A 51 in1,295 mm

Application

Application

 N/A Used for more protection in 5" & 6"

Installation of Expansion Joints

Installation of Expansion Joints

 N/A
  • When the duct is shorter than 50 ft., no Expansion Joint needed
  • When the duct is between 50 ft. up to 200 ft., install one Expansion Joint at the mid point
  • If the duct is longer than 200 ft., install one Expansion Joint every 200 ft. apart

Note

Note

 N/A All Expansion Joints have a yellow line on the nipple end of the joint for proper installation.