COMPANY HEADER
Terms
  • Alignment/Expansion Fittings with O-Rings
Alignment/Expansion fitting is sometimes referred to as an Expansion/Deflection joint.
(The clamps holding the rubber sleeve connecting the two nipples are made from stainless steel for corrosion protection.)
1 - 4 of 4 | Results Per Page | View | Unit of Measure
1 
Request Information Compare Items

Item #

Item Name

Nominal Size

A

B

L [Max]

N/A 3 Inch (in) Nominal Size Iron Pipe Size (IPS) Aboveground Alignment/Expansion Fitting with O-Ring N/A 3 in N/A 3.66 in93 mm N/A 3.5 in89 mm N/A 51 in1,295 mm
N/A 4 Inch (in) Nominal Size Iron Pipe Size (IPS) Aboveground Alignment/Expansion Fitting with O-Ring N/A 4 in N/A 4.61 in117 mm N/A 4.5 in114 mm N/A 51 in1,295 mm
N/A 5 Inch (in) Nominal Size Iron Pipe Size (IPS) Belowground Alignment/Expansion Fitting with O-Ring N/A 5 in N/A 5.79 in147 mm N/A 5.6 in142 mm N/A 51 in1,295 mm
N/A 5 Inch (in) Nominal Size Iron Pipe Size (IPS) Aboveground Alignment/Expansion Fitting with O-Ring N/A 5 in N/A 5.79 in147 mm N/A 5.6 in142 mm N/A 51 in1,295 mm
1 - 4 of 4 | Results Per Page | View | Unit of Measure
1