Alignment/Expansion fitting is sometimes referred to as an Expansion/Deflection joint.
(The clamps holding the rubber sleeve connecting the two nipples are made from stainless steel for corrosion protection.)
(The clamps holding the rubber sleeve connecting the two nipples are made from stainless steel for corrosion protection.)
Unit of Measure
1
Item # |
Item Name |
Nominal Size |
A |
B |
L [Max] |
|---|---|---|---|---|---|
| 30C-SW-31 | N/A 3 Inch (in) Nominal Size Iron Pipe Size (IPS) Aboveground Alignment/Expansion Fitting with O-Ring | N/A 3 in | N/A 3.66 in93 mm | N/A 3.5 in89 mm | N/A 51 in1,295 mm |
| 40C-SW-31 | N/A 4 Inch (in) Nominal Size Iron Pipe Size (IPS) Aboveground Alignment/Expansion Fitting with O-Ring | N/A 4 in | N/A 4.61 in117 mm | N/A 4.5 in114 mm | N/A 51 in1,295 mm |
| 50A-MW-31 | N/A 5 Inch (in) Nominal Size Iron Pipe Size (IPS) Belowground Alignment/Expansion Fitting with O-Ring | N/A 5 in | N/A 5.79 in147 mm | N/A 5.6 in142 mm | N/A 51 in1,295 mm |
| 50C-MW-31 | N/A 5 Inch (in) Nominal Size Iron Pipe Size (IPS) Aboveground Alignment/Expansion Fitting with O-Ring | N/A 5 in | N/A 5.79 in147 mm | N/A 5.6 in142 mm | N/A 51 in1,295 mm |
Unit of Measure
1
